Home Productos Pantalla OLED Pantalla OLED Gráfico WEA012864D-01

Pantalla de OLED SSD1606, 0.96", 128x64, COG+PCB, I2C / SPI

Modelo Nº WEA012864D-01

►Tipo : Gráfico
►Estructura : COG+PCB
►Tamaño : 0.96 pulgada
►Matriz de puntos 128 x 64
►Controlador integrado SSD1306BZ
►Fuente de alimentación de 3V/5V
►1/64 duty
►Interfaz : I2C,SPI

DESCRIPCIÓN

  • WEA012864DWPP3N00001: Blanco
  • WEA012864DLPP3N00001: Amarillo
  • WEA012864DBPP3N00001: Azul

 

DIBUJO

OLED 12864, 12864 OLED, OLED Display Module 12864, SSD1306 OLED, SSD1306 OLED Display, OLED 128x64 SSD1306

ESPECIFICACIONES

Función interfaz Pin

No. Símbolo Función
1 MOSI_SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCLK_SCL
3 DC_SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

Datos mecánicos

Elemento Dimensión Unidad
Matriz de puntos 128 × 64 Dots
Dimensión del módulo 38.00 × 28.50 × 2.37 mm
zona activa 21.74 × 10.86 mm
Tamaño del punto 0.148 × 0.148 mm
Distancia entre puntos 0.17 × 0.17 mm
Modo de visualización Matriz pasiva
Color de la pantalla Monocromos
Drive Duty 1/64 Duty
IC SSD1306BZ
Interfaz I2C, SPI
Tamaño 0.96 pulgada

Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage for Logic VDD 2.8 3.0 3.2 V
Supply Voltage for Logic VIN 4.8 5.0 5.2 V
Supply Voltage for Display VCC 7.0 7.5 8.0 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 12.0 22.0 mA

Valores nominales máximos absolutos

Parameter Símbolo Valor mín. Valor máx. Unidad
Supply Voltage for Logic VDD 1.65 3.3 V
Supply Voltage for Logic VIN 4.0 6.0 V
Supply Voltage for Display VCC 0 16.0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

Search keyword: 128x64 oled, oled 128x64, 0.96 oled, 0.96" oled, 0.96 pulgada oled, oled 0.96, oled 0.96"
go top
close