Accueil Produits Système embarqué WUABAB120V070GTIGX00 / WUABLB120V070GTIGX00

N° de modèle WUABAB120V070GTIGX00 / WUABLB120V070GTIGX00

►WUABAB120V070GTIGX00 : Android OS
►WUABLB120V070GTIGX00 : Yocto Linux OS

►With TFT Model No: WF70GTIZGDNGC#
►TFT Dimension: 7"
►Interface: RGB
►Dalle tactile: Avec dalle tactile capacitive (PCAP)

DESCRIPTION

Version B Carte mère embarquée:
  • NXP Cortex-A9 Solo/Dual lite/Quad core @ 1.0GHz
  • DDR3 intégrée jusqu'à 1 Go et Flash NAND eMMC 8 Go
  • Prend en charge la solution d'affichage en hauteur LVDS, l'interface RVB et HDMI V1.4
  • Full HD Decoder, 2D/3D, OpenGL ES2.0 or up
  • Faible consommation électrique
  • Prend en charge Android 4.4.2 /Linux yocto Daisy 1.6 (QT Included)
  • Prend en charge 6 types de modules TFT de 5” à 12,1” (Prend en charge RGB & LVDS)

DESSIN

WUABAB120V+ 70G series / RGB Interface
WUABLB120V+ 70G series / RGB Interface

SBC Single Board Computer, Single Board, Single Board Computer ARM - Winstar

SPÉCIFICATIONS

Spécifications TFT

Spécifications générales

Article Dimensions Unité
Diagonale 7.0 pouces
Résolution 800 x RGB x 480(TFT) points
Dimensions du module 165.0(W) x 100(H) x 14.7(D) mm
Zone active 154.08 x 85.92 mm
Pas des points 0.0642 x 0.179 mm
Type de LCD TFT, Blanc, Transmissif
Vue préférentielle 12 o'clock
Inversion de sens de l'échelle de gris 6 o'clock
Rapport d'aspect 16:9
Type de rétroéclairage LED, Blanc
Dalle tactile Avec dalle tactile capacitive (PCAP)
Interface RGB
Surface Reflets

Valeurs nominales maximales absolues

Article Symbole Valeur min Valeur type Valeur max Unité
Température de fonctionnement TOP -20 +70
Température de stockage TST -30 +80

Spécifications Carte mère embarquée

Processor System CPU NXP i.MX6 Family, Base on ARM Cortex-A9 processor
    iMX6 Q - Quad core 1.0GHz (Quad core up to 1GHz per core)
    iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core)
    iMX6 S - Solo core 1.0GHz (Single core up to 1GHz per core)
Memory Memory Onboard DDR3L 1GB x64 bit (2GB Max)
  Mass storage  On-board eMMC drive, up to 8GB (128GB Max)
Video LVDS 24 bit LVDS (1024*600、1280*800)
  RGB 24-bits TTL with DE+ H/V sync (800*480; 480*272 for solo)
  HDMI V1.4a (1920*1080)
Graphic Graphic engine Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D)
  H/W Video codec Support MPEG 1/2/4, H.264 Hardware Decoder.
  Display Support 2 types independent display with iMX6DL and i.MX6D/Q
Network Ethernet 1 GbE + IEEE1588 with RJ45 slot
  WIFI/BT BLE 4.0 (internal USB for option WIFI Module, Optional Parts)
USB USB 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG
    2*USB2.0 with pin header
Audio Audio WM8903 Audio codec with 3.5 mm stereo jack
    Mic in, Line out internal pin header
I/O Serial port 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; 
    1 x RS485 (1 x ePH connector)
  CAN Bus 2 x Flex CAN (3.5mm industrial connector, Optional Parts)
  IIC 1 (Client, for PCAP use)
  GPIO 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output
Touch Panel Resistive 4-wire Resistive type (onboard)
  Capacitive CTP is driven IIC interface
Clock RTC RTC Circuitry for low power consumption with Battery on-board
Expansion SD Socket 1 *μSD Slot (support up to SDXC)
Power Voltage DC9V ~ DC24V±10%
  Consumption 2.5W
Environment Temperature -20℃ ~ 70℃ (Operating)
    -30℃ ~ 80℃ (Storage)
Operating System   Android 4.4.2 (WUABAB Series)
    Linux Yocto Daisy 1.6 (WUABLB Series)
Dimension   130mm * 95mm * 20mm
Certification   CE/FCC
go top
close