Home Prodotti TFT LCD Moduli TFT Standard WF50DTYA3MNN0

IPS MIPI Moduli LCD TFT 5"

Modello numero WF50DTYA3MNN0

►Dimensione: 5 pollici
►Risoluzione : 720×1280 punti
►Direzione di visione : IPS
►Interfaccia : MIPI DSI
►A bordo Controllore : No
►Scheda di controllo : Opzione
►Luminosità (cd/m²) : 300
►Cornice di fissaggio : No
►Touch Screen : senza pannello touch

DISEGNO

Winstar 5 MIPI LCD Display, MIPI Interface LCD Panel (Wide Temperature) - WF50DTYA3MNN0

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

Pin Simbolo Funzione
1 NC/TP_GND No connection 
2 NC/TP_SDA No connection
3 NC/TP_SCL No connection
4 NC/TP_INT No connection
5 NC/TP_RST No connection
6 NC/YU  No connection
7 NC/XL No connection
8 NC/YD  No connection
9 NC/XR No connection
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13 NC No connection
14 RESET The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N Leave it open or fix to LVDSVSS level when not in use.
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N Leave it open or fix to LVDSVSS level when not in use.
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
29 CLKN Leave it open or fix to LVDSVSS level when not in use.
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N Leave it open or fix to LVDSVSS level when not in use.
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N Leave it open or fix to LVDSVSS level when not in use.
36-37 GND Power ground
38 LED+ Power for LED backlight anode
39 LED1- Power for LED1 backlight cathode
40 LED2- Power for LED2 backlight cathode

Specifiche generali

Articolo Dimensioni Unità
Dimensione 5.0 pollici
A matrice di punti 720× 3(RGB) ×1280 dots
Dimensione del modulo 66.10 (W) × 120.4 (H) ×1.85 mm
Area attiva 62.1 (W) × 110.4 (H) mm
Passo del Dot 0.08625(W) ×0.08625(H) mm
Tipo LCD TFT, Черный, Trasmissivo
Viewing angle 80/80/80/80
соотношение сторон 16:9
Tipo di backlight LED, Bianco
Con / senza Touch Panel Senza pannello touch
Superficie Bagliore (Glare)

Valori massimi assoluti

Articolo Simbolo Valore Min Valore tipico Valore massimo Unità
Temperatura di lavoro TOP -20 +70
Temperatura di stock TST -30 +80

Caratteristiche elettriche

Articolo Simbolo Valore standard Unità
Valore Min Valore tipico Valore massimo
Power supply for analog circuit VCI 2.5 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver IDD - 44   mA
go top
close