Home Products Embedded System WUAAAA120V070GTITX00

7 inch RTP TFT with Embedded System Board

Model No. WUAAAA120V070GTITX00

►Embedded System Board
►Single Board Computer (SBC)
►TFT Size: 7"
►Resolution: 800×480
►View Direction: 12H
►Interface: RGB
►Touch Screen: With resistive touch panel
►Power Supply: DC12V
►Operating System: Android 4.2.2


WUAAAA120V070GTITX00 is a Winstar Embedded Series model which is having an ARM based motherboard with a 7 inch TFT module of WF70GTIJGDNTA.  This model is featured with 800×480 resolution diagonal size 7” TFT; it supports RGB interface and with a 4-wire Resistive Touch Panel.   This model supports Android 4.2.2 Operating Systems.
The Embedded ARM Board WUAAAA120V0000N0NX00 (A Series) on this model is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
WUAAAA120V0000N0NX00 i.MX6 incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.


7 inch RTP TFT with Embedded System Board - Winstar Display


Embedded System Board Specification

Form Factor    
  Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Processor System Technology DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB(2GB Max)
  Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
  LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
Graphic RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface  
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm * 20mm

TFT Specifications

Item - WF70GTIJGDNTA Dimension Unit
Size 7.0 inch
Dot Matrix 800 × RGB × 480(TFT) Dots
Module Dimension 165.0(W) × 100(H) × 14.7(D) mm
Active Area 154.08 × 85.92 mm
Dot Pitch 0.0642 × 0.179 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
With/Without TP With RTP
Interface RGB
Surface Anti-Glare
go top