Home Products Embedded System WUAAAA120V0000N0NX00

SBC Motherboard, SBC Embedded, SBC Board, Single Board

Model No. WUAAAA120V0000N0NX00

Winstar SBC Embedded system is an ARM based SBC motherboard. It supports Android 4.2 operating systems. 
►CPU : ARM
►Motherboard only
►Single Board Computer (SBC)
►Power Supply: DC12V
►NXP Cortex-A9 Dual / Quad core @1.0GHz
►On-board DDR3 up to 2GB & 8GB eMMC NAND Flash
►Support LVDS high solution display & RGB Parallel interface
►Full HD Decoder, 2D/3D, OpenGL
►Low power consumption
►Support Android 4.2.2
►Support TFT Modules from 5”~12.1” (Support RGB & LVDS)
►Support RGB & LVDS interfaces

DESCRIPTION

Hardware Introduction:
This motherboard WUAAAA120V0000N0NX00 i.MX6 is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.

The WUAAAA120V0000N0NX00 i.MX6 incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.

The module targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment system, POS, Data Acquisition, Thin Clients, Robotics, Gaming and more.

It offers a wide range of interfaces from simple GPIOs, industry standard I2C, SPI, and UART buses through to high speed USB 2.0 interface and a 16/32bit external memory bus (parallel bus). The RGB and LVDS interface offer users to connect with high resolution displays.

Software Introduction:
The WUAAAA120V0000N0NX00 iMX-6 with Android 4.2.2 Operating System.  Winstar motherboard also supports additional Operating Systems. For further details and technical support, please contact us.

DRAWING

Winstar Embedded Motherboard - SBC Motherboard, SBC Embedded, SBC Board, Single Board

SPECIFICATIONS

Winstar Embedded Motherboard Specification
(SBC Motherboard, SBC Embedded, SBC Board, Single Board)

Form Factor    
  Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Processor System Technology DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB(2GB Max)
  Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
  LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
Graphic RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface  
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm * 20mm
go top
close