10.2" TFT LCD, Industrial TFT LCD
Model No. WF102PTIFGDBT0
►Size : 10.2 inch
►Resolution : 800 x 480 dots
►View Direction : 12H
►Interface : MCU
►Built-in Controller : RA8875
►Control-Board : Yes
►Brightness(cd/m2) : 250
►Frame Through Hole : Yes
►Touch Screen : Resistive Touch Panel (RTP)
DESCRIPTION
The WF102PTIFGDBT0 TFT-LCD is a 10.2" of Winstar TFT P series family. The WF102P is the WF102A extended model which is with RA8875 controller board plus a 36 pin-out connector on board. This 10.2" TFT LCD model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. This display is with the module dimension of 235.0 x 145.8 mm and AA size of 222.0 x 132.48 mm. The key Advantages of TFT P Series are as below:
- Winstar P Series modules integrated a 36 pin-out connector on RA8875 controller board and all connectors are in the same direction.
- Winstar TFT P Series are both fit for 8 bit and 16 bit parallel interface options.
- The pin no. 33 ~ 36 already been defined as backlight supply.
- TFT P Series modules are built in backlight driver IC.
- Resistive Touch Screen option is built-in on the RA8875 control board.
- Capacitive Touch Screen option is available for TFT P Series display.
- It supports the Chinese character, backlight brightness adjustment, Flash Memory and touch panel driver.
DRAWING
SPECIFICATIONS
Interface
| Pin | Symbol | Function |
|---|---|---|
| 1 | GND | System ground pin of the IC . Connect to system ground. |
| 2 | VDD | Power Supply : +3.3V |
| 3 | NC | No connect |
| 4 | RS | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7~14 | DB0~DB7 | Data bus |
| 15~22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
| 23 | WAIT | Wait Signal Output(H:active) |
| 24 | NC | No connect |
| 25 | CS | Chip select |
| 26 | RST | Hardware reset |
| 27 | L/R | Left / right selection; Default L/R=H |
| 28 | U/D | Up/down selection; ; Default U/D=L |
| 29~32 | NC | No connect |
| 33~34 | VLED- | Power for LED Driver IC(GND) |
| 35~36 | VLED+ | Power for LED Driver IC(+5V) |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 10.2 | inch |
| Dot Matrix | 800 × RGB × 480 | dots |
| Module dimension | 235.0 (H) × 145.8 (V) × 13.8 (D) | mm |
| Active area | 222.0(W) × 132.48(H) | mm |
| Dot pitch | 0.0925(W) × 0.276(H) | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| Backlight Type | LED, Normally White | |
| Controller IC | RA8875 | |
| Interface | Digital 8080 family MPU 8bit/16bit | |
| Touch Screen | Resistive touch screen (RTP) | |
| Surface | Anti-Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | - | 3.0 | 3.3 | 3.6 | V |
| Supply Current For LCM | IDD | - | - | 190 | 195 | mA |
Search keyword: tft 10.2, tft 10.2", 10.2 tft lcd, 10.2" tft lcd, 10.2 inch tft lcd, tft lcd 10.2, 10.2 tft display, 10.2" tft display, 10.2 inch tft display, tft display 10.2, tft display 10.2"
