Home Products TFT LCD Standard TFT Color Display WF24KTLAJDNN0

SPI 240x320 TFT LCD 2.4"

Model No. WF24KTLAJDNN0

►240×320 LCD
►Size: 2.4"
►Resolution : 240×320 dots
►View Direction:6H
►Interface: SPI
►IC Part No.: Himax8347-I
►Control-Board: No
►Brightness(cd/m²): 500
►Frame Through Hole: No
►Touch Screen: Without Touch Screen

DESCRIPTION

WF24KTLAJDNN0 is a diagonal size 2.4 inch TFT-LCD module with resolution 240x320 pixels. This module is built in with Himax8347-I IC; it supports 4-wire SPI interface, supply voltage for analog (VDD) range from 2.4V to 3.3V. This module is having Glare surface panel, View Direction 6 o'clock, Gray scale inversion 12 o'clock, contrast ratio 500:1.

WF24K TFT-LCD module is Portrait mode with brightness 500 nits (typical value). The module also is available for Resistive Touch Screen (RTP) optional. WF24K can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

DRAWING

240x320 LCD, 240x320 TFT LCD 2.4 - WF24KTLAJDNN0 -Winstar Display

SPECIFICATIONS

Interface

NO Symbol Function
1 GND Ground
2 LED+ Anode of LED backlight.
3 LED- Cathode of LED backlight.
4 GND Ground
5 VDD Power supply(TYP:2.8V).
6 RESET System reset pin.
7 SDA Serial data input pin and output pin(SDA) in serial bus system interface I.
Serial data input pin (SDI) in serial bus system interface II. The data is inputted on the rising edge of the SCL signal.
If not used, please let it open or connected to VSSD.
8 SCL (NWR) Write enable pin I80 parallel bus system interface.
(SCL) server as serial data clock in serial bus system interface when IFSEL=0.
Fix it to IOVCC or VSSD level when not used.
9 CS Chip select signal.
Low: chip can be accessed;
High: chip cannot be accessed. Must be connected to VSSD if not in use.
10 RS Command / parameter or display data selection pin
11 GND Ground
12 SDO Serial data output pin (SDO) in serial bus system interface II.
If not used, please open this pin.
13 TE Tearing effect output.
If not used please open this pin
14 IM3 serial interface I  /  serial interface II 
15 GND Ground
16 NC No connect
17 NC No connect
18 NC No connect
19 NC No connect
20 GND Ground

General Specifications

Item Dimension Unit
Size 2.4 inch
Dot Matrix 240 × RGB × 320(TFT) dots
Module dimension 42.72(W) × 60.26(H) × 2.25(D) mm
Active area 36.72 × 48.96 mm
Dot pitch 0.153 × 0.153 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Interface SPI
Aspect Ratio Portrait
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Analog VDD 2.4   3.3 V
Supply Current For LCM IDD 5 7.5 mA

Search keyword: tft 2.4, tft 2.4", 2.4 tft lcd, 2.4" tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4" tft display, 2.4 inch tft display, tft display 2.4, tft display 2.4", 240x320 lcd
go top
close