Home Products TFT LCD Standard TFT Color Display WF35RTIACDNNB

3.5 inch 320240 Color TFT LCD Display Module

Model No. WF35RTIACDNNB

►Size: 3.5"
►Resolution : 320x240 dots (320240 TFT)
►View Direction: 12H
►Interface: SPI / MCU / RGB
►Built-in Controller: SSD2119
►Control-Board : No
►Brightness(cd/m²): 400
►Frame Through Hole: Option
►Touch Screen : Without touch screen

DESCRIPTION

WF35RTIACDNNB is a diagonal size 3.5 inch TFT-LCD module with resolution QVGA 320x240 pixels. This module is built in with SSD2119 IC; it includes the controller and driver IC functions, supports RGB, SPI, MCU interface, supply voltage (VCI) range from 2.5V to 3.6V. This module is having Anti-Glare surface panel, View Direction 12 o'clock, Gray scale inversion 6 o'clock, and aspect ratio 4:3.

WF35R TFT-LCD module is landscape mode with brightness 400 nits (typical value). The module also is available for Resistive Touch Screen and Projected Capacitive Touch Screen optional. WF35R can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

DRAWING

Winstar 320240 TFT - 3.5 inch Color TFT LCD Display Module - WF35RTIACDNN0

SPECIFICATIONS

Interface

No. Symbol Description
1 VCI Booster input voltage pin
2 VCI Booster input voltage pin
3 VSS Ground
4 VDDIO Voltage input pin for logic
5 VSS Ground
6 RESET Reset Signal pin (“Low” is enable)
7 DC/SDC Data or Command select PIN.
8 E/RD 6800 system: E(enable signal)
8080 system : RD(read strobe signal)
Serial mode: Not use and should be connected to VDDIO or VSS
9 WR 6800 system : RW (indicates read cycle when high ,write cycle when low)
8080 system : WR (write strobe signal)
10 CS Chip select
11 SCL Serial Clock.
12 SD0 Serial Data output
13 SDI Serial Data Input
14 WSYNC Ram write synchronization output. Leave it OPEN when not used.
15~32 D17~D0 Data bus
33 VSS Ground
34 DOTCLK Dot-clock signal and oscillator source
35 HSYNC Line Synchronous Signal
36 VSYNC Frame Synchronous Signal
37 DE Display enable pin for controller
38 VSS Ground
39~42 PS0~PS3 Interface select PIN
43 VSS Ground
44~47 NC NC
48 VSS Ground
49 LEDK Backlight LED Cathode
50 LEDA Backlight LED Anode.

General Specifications

Item Dimension Unit
Size 3.5 inch
Dot Matrix 320 × RGB × 240 (TFT) dots
Module dimension 76.84(W) × 63.84(H) × 3.27(D) mm
Active area 70.08 × 52.56 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Interface 8-bit/16-bit CPU or option other mode (build in controller)
Aspect Ratio 4:3
Backlight Type LED, Normally White
IC SSD2119
Touch Screen Without touch screen
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -30 80

Electrical Characteristics

Item Symbol MIN TYP MAX Unit
Power supply voltage VCI 2.5 3.3 3.6 V
Power supply pin of IO pins VDDIO 1.4 3.3 3.6 V
Current consumption IVCI+IVDDIO - - 10 mA
Dot clock DCK - 5.5 8.2 MHz

Search keyword: tft 3.5, tft 3.5", 3.5 tft lcd, 3.5" tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5" tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5"
go top
close