Home Produtos LCD TFT Bar Type TFT LCD WF52QTLBSDBN0

Model No. WF52QTLBSDBN0

►Formato do display : 480 x 128
►Tamanho: 5,2 polegadas
►Direção de exibição: 6H
►Interface : 8080, MPU
►Controlador SSD1963 integrado
►Placa de controle : Yes
►Brilho (cd/m²) : 500
►Quadro com furo passante : Yes
►Tela de Toque: Sem painel de toque

DRAWING

Winstar 5.2" TFT LCD with Display Controller Board

SPECIFICATIONS

Interface

1. LCM PIN Definition (CON4)
Pin Symbol Function
1 GND System round pin of the IC.
Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 C/D Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RESET Hardware reset
27 LR Right /Left selection; Default R/L is Pull High
28 UD Up/down selection; Default U/D is Pull High
29~32 NC No connection
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+5V)

2. LCM PIN Definition (CON1)
Pin Symbol Function
1 FG Frame Grand
2 GND System round pin of the IC.
Connect to system ground.
3 VDD Power Supply : +3.3V
4 BLE Backlight control signal , H: On \ L: Off
5 WR Write strobe signal
6 RD Read strobe signal
7 CS Chip select
8 C/D Data/Command select
9 NC No connect
10 RESET Hardware reset
11~18 DB0~DB7 Data bus
19~20 NC No connect 
21 VLED+ VLED+ for B/L LED inverter (+5V)
22 VLED- VLED- for B/L LED inverter (GND)
23~25 NC No connect
26 GND Hardware reset

General Specifications

Item Dimension Unit
Size 5.2 inch
Dot Matrix 480 × RGB × 128 dots
Module dimension 180.0 × 65.0 × 8.8 mm
Active area 127.152 × 33.9072 mm
Dot pitch 0.0883 × 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Backlight Type LED, Normally White
Driver IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
With /Without TP Without TP
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 mA
go top
close