Home Produtos LCD TFT Painel TFT com Placa de controle WF102PTIFGDBT0

Model No. WF102PTIFGDBT0

►Tamanho: 10,2 polegadas
►Resolução : 800 x 480 pontos
►Direção de exibição: 12H
►Interface : MCU
►Controlador RA8875 integrado
►Placa de controle : Yes
►Brilho(cd/m2) : 250
►Quadro com furo passante : Yes
►Tela de toque: Com painel de toque resistivo (RTP)

DRAWING

WF102PTIFGDBT0 - TFT LCD Display + Controller Board 10.2

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC .
Connect to system ground.
2 VDD Power Supply : +3.3V
3 NC No connect
4 RS Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23 WAIT Wait Signal Output(H:active)
24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29~32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 10.2 inch
Dot Matrix 800 × RGB × 480 dots
Module dimension 235.0 (H) × 145.8 (V) × 13.8 (D) mm
Active area 222.0(W) × 132.48(H) mm
Dot pitch 0.0925(W) × 0.276(H) mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED,Normally White
Controller IC RA8875
Interface Digital 8080 family MPU 8bit/16bit
With / Without TP With RTP
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD - 3.0 3.3 3.6 V
Supply Current For LCM IDD - - 190 195 mA
go top
close