Home Produtos LCD TFT Painel TFT com Placa de controle WF57QTIBCDBGA

Model No. WF57QTIBCDBGA

►Tamanho: 5,7 polegadas
►Resolução : 320 x 240 pontos
►Direção de exibição: 12H
►Interface : MCU
►Controlador SSD1963 integrado
►Placa de controle : Yes
►Brilho(cd/m²): 700
►Quadro com furo passante: Yes
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►O-Film : Opção

DRAWING

TFT 320x240 Display with Controller Board - WF57QTIBCDBGA - Winstar

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23 NC No connect
24 CTP_INT CTP_ External interrupt to the host
25 CS Chip select
26 RESET Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29 CTP_SCL CTP_SPI Slave mode, chip select, active low / I2C clock input
30 CTP_SDA CTP_ SPI Slave mode, data input / I2C data input and output
31 CTP_RST CTP_ External Reset, Low is active
32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 320 × RGB × 240(TFT) dots
Module dimension 141.12 × 101.55 × 15.24 mm
Active area 115.2 × 86.4 mm
Dot pitch 0.12 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
Controller IC SSD1963
TFT Interface Digital 8080 family MPU  8bit/16bit
PCAP IC FT5426
PCAP Interface I2C
PCAP FW Version FN058A001_FT5426_V02_20180604_all.bin
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 360 560 mA

Related Products

go top
close