Home Produtos LCD TFT Painel TFT com Placa de controle WF43QTIBEDBTD

Model No. WF43QTIBEDBTD

►Formato do display : 480 x 272
►Tamanho: 4,3 polegadas
►Direção de exibição: 12H
►Interface : MCU
►Controlador SSD1963 integrado
►Placa de controle : Yes
►Brilho(cd/m²): 350
►Quadro com furo passante : Yes
►Tela de toque: Com painel de toque resistivo (tela)

DRAWING

Tesistive Touch Panel TFT with LCD Controller Board 4.3 - WF43QTIBEDBTD

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connection
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 XL Left electrode
30 YU Top electrode
31 XR Right electrode
32 YD Bottom electrode
33~34 VLED- VLED- for B/L  LED inverter  (GND)
35~36 VLED+ VLED+ for B/L  LED inverter   (+3.3V)

General Specifications

Item Dimension Unit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 106.7 × 83.98 × 8.05 mm
Active area 95.04 × 53.856 mm
Dot pitch 0.066 × 0.198 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Controller IC SSD1963 
Interface Digital 8080 family MPU 8bit/16bit
With /Without TP With RTP
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 300 mA
go top
close