Home Produtos LCD TFT Display TFT Alto Brilho WF43GSIAEDNGC

Model No. WF43GSIAEDNGC

►Formato do display : 480 x 272
►Tamanho: 4,3 polegadas
►Direção de exibição: 12H
►Interface : RGB
►TFT Driver IC : ILI6480B
►Placa de controle : Opção
►Brilho(cd/m2): 800
►Quadro com furo passante: Opção
►Tela de Toque: Com painel de toque capacitivo (PCAP)

DRAWING

Winstar 4.3 Sunlight Readable CTP TFT LCD Display - WF43GSIAEDNGC

SPECIFICATIONS

Interface

1. LCM PIN Definition

Pin Symbol Function
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power voltage
5 R0 Red data (LSB)
6~11 R1~R6 Red data
12 R7 Red data (MSB)
13 G0 Green data (LSB)
14~19 G1~G6 Green data
20 G7 Green data (MSB)
21 B0 Blue data (LSB)
22~27 B1~B6 Blue data
28 B7 Blue data (MSB)
29 GND Power ground
30 CLK Pixel clock
31 DISP Display on/off
32~33 NC No connection
34 DE Data Enable
35 NC No connection
36 GND Power ground
37~40 NC No connection

2. PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 /WAKE External interrupt from the host
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

General Specifications

Item Dimension Unit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.6(D) mm
Active area 95.04 × 53.86 mm
Dot pitch 0.066 × 0.198 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
TFT Driver IC ILI6480B
TFT Interface 24-bit RGB
Aspect Ratio 16:9
Backlight Type LED, Normally White
PCAP FW Version 3
PCAP IC FT5426DQ8
PCAP Interface I2C
Touch Panel Projected capacitive touch panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VCC 3.1 3.3 3.5 V
Supply Voltage For Touch Logic VDDT   2.8 - 3.3 V
Supply Current For LCM ICC - - 17 25 mA
Power Consumption - - - 56 87 mW
go top
close