Home Produtos LCD TFT Módulo de LCD TFT standard WF57ETIACDNGF

Model No. WF57ETIACDNGF

►Formato do display : 320 x 240
►Tamanho: 5,7 polegadas
►Direção de exibição: 12H
►Interface : RGB
►Controlador integrado: Não
►Placa de controle: Opção
►Brilho (cd/m²) : 700
►Controlador integrado: Yes
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►O-Film : Opção

DRAWING

5.7 inch Display, 5.7 inch Projected Capacitive Touch Screen Display - WF57ETIACDNGF

SPECIFICATIONS

Interface

Pin Symbol Function
1~2 IF1~IF2 Input data format control
3 POL Polarity Signal connect to VCOM driving circuit.
4 RESET Hardware reset
5 SPENA Chip select
6 SPCL Serial Clock
7 SPDA Serial Data
8~15 B0~B7 Blue Data bit
16~23 G0~G7 Green Data bit
24~31 R0~R7 Red Data bit
32 Hsync Horizontal synchronous signal
33 Vsync Vertical synchronous signal
34 Data CLK Dot data clock
35~36 AVDD(analog) Analog power: 4.5V~5.5V
37~38 VCC(Digital) Digital power: 3V~3.6V
39 NPC NTSC/PAL mode Auto detection result
H:NTSC/L:PAL
40~41 VGL Gate off power
42 UD Up/down selection
43 VGH Gate on power
44 LRC Shift direction of device internal shift register control.
45 GND System ground pin of the IC.  Connect to system ground.
46~47 VCOM VCOM driving input
48 ENB Signal to settle the horizontal display position
49~50 GND System ground pin of the IC.  Connect to system ground.

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 320 × RGB × 240 (TFT) dots
Module dimension 141.12 × 101.55 × 8.235 mm
Active area 115.2 × 86.4 mm
Dot pitch 0.12 × 0.36 mm
LCD type TFT, Normally White, Transmissive
TFT Interface 24-bit RGB
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
PCAP IC FT5426
PCAP Interface I2C
PCAP FW Version FN058A001_FT5426_V02_20180604_all.bin
Backlight Type LED, Normally White
Touch Screen Projected Capacitive Touch Screen (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VCC 3.0 3.3 3.6 V
Supply Voltage For Touch Logic VDDT - 2.8 - 3.3 V
Input High Volt. VIH 0.7 Vcc Vcc V
Input Low Volt. VIL 0 0.3 Vcc V
LCD Driving Supply Voltage VGH x 1 Ta=25℃ - 15 - V x 3
VGL x 2 - -10 -
VcomH 2.5 - 5.5
VcomL -2.0 - 0
Supply Current IVCC VCC=3.3V 5 8 mA
go top
close