Home Produtos LCD TFT Módulo de LCD TFT standard WF18FTLAADNN0


►Formato do display : 128x160
►Tamanho: 1,77 polegadas
►Direção de exibição: 6H
►Interface: MCU
►Controlador ST7735S integrado
►Placa de controle: Não
►Brilho(cd/m²): 500
►Quadro com furo passante: Não
►Tela de Toque: Não


WF18FTLAADNN0 - 1.77" Color TFT LCD Module



Pin Symbol I/O Function
1 VLED- P Back light cathode
2 VLED P Back light anode
3 IM0 I - MCU Parallel Interface Type Selection
-If Not Used, Please Fix this Pin at VDDI or DGND Level. 
4 IM1
5 IM2 I MCU Parallel Interface Bus and Serial Interface select
IM2='1', Parallel Interface
IM2='0', Serial Interface
6 RESET P Reset signal
7-12 NC - No Connect
13-28 DB15-DB0(SPI_SDA) I/O DB15:0] are used as MCU parallel interface data bus.
-DBis the serial input/output signal in serial interface mode.
-In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level. 
29 NC - No Connect
30 RD I Read Enable in 8080 MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
31 WR I Serial clock
-Write Enable in MCU Parallel Interface.
-If not used, please fix this pin at VDDI or DGND level. 
32 D/C(SPI_SCL) I -Display data/command Selection Pin in MCU Interface.
-D/CX='1': Display Data or Parameter.
-D/CX='0': Command Data.
-In Serial Interface, this is used as SCL.
-If not used, please fix this pin at VDDI or DGND level.
33 CS(SPI_CS) I Chip enable
34 IOVCC P Interface Operation Voltage 
35 VCI P Analog Supply Voltage
36 GND P Ground
37-40 NC - No Connect

General Specifications

Item Dimension Unit
Size 1.77 inch
Dot Matrix 128 × RGB × 160(TFT) dots
Module dimension 34.0(W) × 45.83(H) × 2.65(D) mm
Active area 28.03 × 35.04 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Portrait
IC ST7735S
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -30 80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Analog VCI 2.5 2.75 4.8 V
Interface Operation Voltage IOVCC 1.65 1.8 3.7 V
Supply LCM current ICI(mA) 0.9 2 mA
go top