Home Produtos LCD TFT Módulo de LCD TFT standard WF57BTIACDNG0

Model No. WF57BTIACDNG0

►Formato do display : 320 x 240
►Tamanho: 5,7 polegadas
►Direção de exibição: 12H
►Interface : RGB
►Controlador integrado: Não
►Placa de controle: Opção
►Brilho (cd/m²) : 400
►Quadro com furo passante: Yes
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►O-Film : Opção

DRAWING

5.7 inch PCAP TFT LCD Display Module - Winstar - WF57BTIACDNG0

SPECIFICATIONS

Interface

Pin Symbol Function
1~2 IF1~IF2 Input data format control
3 POL Polarity Signal connect to VCOM driving circuit.
4 RESET Hardware reset
5 SPENA Chip select
6 SPCL Serial Clock
7 SPDA Serial Data
8~15 B0~B7 Blue Data bit
16~23 G0~G7 Green Data bit
24~31 R0~R7 Red Data bit
32 Hsync Horizontal synchronous signal
33 Vsync Vertical synchronous signal
34 Data CLK Dot data clock
35~36 AVDD(analog) Analog power: 4.5V~5.5V
37~38 VCC(Digital) Digital power: 3V~3.6V
39 NPC NTSC/PAL mode Auto detection result H:NTSC/L:PAL
40~41 VGL Gate off power
42 UD Up/down selection
43 VGH Gate on power
44 LRC Shift direction of device internal shift register control.
45 GND System ground pin of the IC. Connect to system ground.                 
46~47 VCOM VCOM driving input
48 ENB Signal to settle the horizontal display position
49~50 GND System ground pin of the IC. Connect to system ground.                  

General Specifications

Item Dimension Unit
Size 5.7 inch
Dot Matrix 320 × RGB × 240 (TFT) dots
Module dimension 160(W) × 109(H) × 10.035 (D) mm
Active area 115.2 × 86.40 mm
Dot pitch 0.12 × 0.36 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
PCAP FW Version 7
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VCC 3.0 3.3 3.6 V
Supply Voltage For Touch VDDT 2.8 3.3 V
Supply Current For LCM ICC 17 25 mA
Input High Volt. VIH 0.7 VCC VCC V
Input Low Volt. VIL 0 0.3 VCC V
LCD Driving
Supply Voltage
VGH 15 V
VGL -10 V
VCOMH 2.5 5.5 V
VCOML -2.0 0 V
AVDD 4.5 5.0 5.5 V
go top
close