首頁 產品介紹 嵌入式單板電腦 WUABAB120V0000N0NX00 / WUABLB120V0000N0NX00

Android / Linux 嵌入式系統, 單板電腦

型號 WUABAB120V0000N0NX00 / WUABLB120V0000N0NX00

►WUABAB120V0000N0NX00 : Linux 嵌入式系統 主機版 (無WIFI版)
►WUABLB120V0000N0NX00 : Android 嵌入式系統 主機版 (無WIFI版)

►嵌入式系統 / 單板電腦 / 工業主機板 特性:
►NXP Cortex-A9 Solo/Dual lite/Quad core @ 1.0GHz
►On-board DDR3 Up to 1GB & 8GB eMMC NAND Flash
►支援 LVDS 高解析度顯示器、RGB 並行介面和HDMI V1.4
►Full HD 解碼器, 2D/3D, OpenGL ES2.0或更高版本
►低耗電
►支援 Android 4.4.2 / Linux yocto Daisy 1.6 (QT Included)
►支援 6 種 TFT 模組尺寸 5吋~12.1吋 (支援 RGB & LVDS)

產品敘述

硬體簡介:B 版系列
WUABAB120V嵌入式主機板B系列是使用NXP i.MX6嵌入式System-on-chip (SoC) 系統的單板電腦(SBC)。華凌B系列嵌入式主機板可支持5英寸~12.1吋的TFT模組,同時此款主機板提供Android和Linux作業系統可供選擇。WUABAB120V具有可擴展的多核ARM Cortex™A9處理器,具有一到四個相應的版本。該模組以最低功耗提供高CPU和圖形性能。
 
此工業主機板支援多種接口(interface),從簡單的GPIO,工業標準I2C,SPI和UART到高速USB 2.0接口和16/32bit外部memory bus (parallel bus)的各種接口。支援RGB和LVDS接口並提供用戶連接高分辨率的顯示器。WUABAB120V i.MX6主機板支持不同類型的連接器,包括主機USB,USB OTG,DC插孔,音頻插孔和RJ45。客戶可以自行擴展接口。連接器可以匹配3種類型的排針/連接器,分別為1.27mm,2.0mm和2.54mm。

軟體簡介: B 版系列
WUABAB120V iMX-6嵌入式單板計算機支援Android 4.4.2和Linux作業系統,以下是無WIFI版主機板完整的料號:
WUABAB120V0000N0NX00: Android 嵌入式系統 主機板,無WIFI版
WUABLB120V0000N0NX00: Linux 嵌入式系統 主機板,無WIFI版

規格圖

Embedded Single Board Computer, Single Board Computers, Android Single Board Computer, Linux Single Board Computer - Winstar

產品規格

嵌入式單板電腦

Processor System CPU NXP i.MX6 Family, Base on ARM Cortex-A9 processor
    iMX6 Q - Quad core 1.0GHz (Quad core up to 1GHz per core)
    iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core)
    iMX6 S - Solo core 1.0GHz (Single core up to 1GHz per core)
Memory Memory Onboard DDR3L 1GB x64 bit (2GB Max)
  Mass storage  On-board eMMC drive, up to 8GB (128GB Max)
Video LVDS 24 bit LVDS (1024*600、1280*800)
  RGB 24-bits TTL with DE+ H/V sync (800*480; 480*272 for solo)
  HDMI V1.4a (1920*1080)
Graphic Graphic engine Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D)
  H/W Video codec Support MPEG 1/2/4, H.264 Hardware Decoder.
  Display Support 2 types independent display with iMX6DL and i.MX6D/Q
Network Ethernet 1 GbE + IEEE1588 with RJ45 slot
  WIFI/BT BLE 4.0 (internal USB for option WIFI Module, Optional Parts)
USB USB 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG
    2*USB2.0 with pin header
Audio Audio WM8903 Audio codec with 3.5 mm stereo jack
    Mic in, Line out internal pin header
I/O Serial port 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; 
    1 x RS485 (1 x ePH connector)
  CAN Bus 2 x Flex CAN (3.5mm industrial connector, Optional Parts)
  IIC 1 (Client, for PCAP use)
  GPIO 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output
Touch Panel Resistive 4-wire Resistive type (onboard)
  Capacitive CTP is driven IIC interface
Clock RTC RTC Circuitry for low power consumption with Battery on-board
Expansion SD Socket 1 *μSD Slot (support up to SDXC)
Power Voltage DC9V ~ DC24V±10%
  Consumption 2.5W
Environment Temperature -20℃ ~ 70℃ (Operating)
    -30℃ ~ 80℃ (Storage)
Operating System   Android 4.4.2 (WUABAB Series)
    Linux Yocto Daisy 1.6 (WUABLB Series)
Dimension   130mm * 95mm * 20mm
Certification   CE/FCC

 

Position on Connector and Pin Header
Connector No. Description Connector No. Description
J2(J8) DC Power Jack J15 RS485 port
J5 Micro SD Card Slot J11 Audio input interface
J6 USB port in Type A connector J12 Audio output interface
J7 Ethernet in RJ45 Slot J19 RTP interface
J22 GPIO port1 J4 3.5mm Earphone+ Micro phone
J24 GPIO port2 J1 USB OTG interface
J9, J20 USB port in pin header J21 CAN Bus
J16, J18,J26 RS232 port J25 I2C interface for CTP(PCAP)
J23 RS232 for Console J14 RGB LCD interfaces
J10 LVDS LCD interfaces J3 HDMI
SW2 Display selection switch    
go top
close